nke PCBs Flex na-agbanwe agbanwe & nke siri ike - Shenzhen Fumax Technology Co., Ltd.

PCB Flex na-agbanwe agbanwe & nke siri ike

Fumax - Nkwekọrịta n'ichepụta PCB na-agbanwe agbanwe, PCB ndị na-agbanwe agbanwe, PCB na-agbanwe agbanwe, PCB na-agbanwe agbanwe na Aluminium.Dị ka a mafacturer nke Flexible & Rigid Flex PCBs, Fumax nwere ike inye ngwa ngwa ntụgharị / ngwa ngwa prototype ọrụ na uka mmepụta ọrụ maka ndị ahịa n'ụwa nile.

PCB

Ngwaahịa dị iche iche nke PCB Flexible & Rigid Flex nke Fumax nwere ike inye:

PCB ndị na-agbanwe agbanwe

Atụmatụ -- bọọdụ sekit ebipụta na-agbanwe agbanwe dabere na polyimide, site na otu akụkụ ruo ngbanwe multilayer.Ìhè ma dị gịrịgịrị, na-enyere aka ibelata nha na ịdị arọ nke ngwaahịa eletrọnịkị.Njupụta wiring dị elu, ịgbagọ n'efu, winding, na mpịachi, mgbanwe dị elu, mkpọsa ọkụ dị oke mma yana solderability na ọnụ ọgụgụ SMD na njupụta.

Ikike -- Ụdị ihe (PI/LCP/PTFE);oyi akwa (1-10);Ọkpụrụkpụ nke Ngwaahịa Emechara (0.1-0.8mm);Akụkụ nke Ngwaahịa Emechara (9*22inch);Opekempe na-ehulata Radius (okpukpu osisi 3-6);Ogologo Ahịrị/Oghere (2.5/2.5mil);Ogo nke nha nha (± 0.05mm).

 

PCB ndị na-agbanwe agbanwe

Atụmatụ -- Ihe FR4 dị gịrịgịrị, nwere akụkụ abụọ.Kachasị nke okirikiri ịgbagọ ise nwere radius agbagọ 5mm.Ngwọta ngbanwe na-arụ ọrụ dị ọnụ ahịa.Ịzụ ahịa na-enweghị tupu eme achịcha.Ihe owuwu kwụsiri ike, na-eme ka njikwa dị mfe n'oge mgbakọ.

Ikike - Akụrụngwa (FR4 (125µm Dielectric));oyi akwa (2 oyi akwa PTH);Ọkpụrụkpụ nke Ngwaahịa Emechara (0.15 mm - 0.18 mm);Ọkpụkpụ ọla kọpa (18µm / 35µm / 70µm);Min.Ahịrị / oghere (50µm / 50µm);Oke.Oke PCB (580 mm x 500 mm);Ogwu kacha nta (0.2mm).

 

PCB ndị siri ike-agbanwe agbanwe

Atụmatụ -- nkwụdo efu na nguzogide mgbanwe.Mbelata arọ.Ịtụkwasị obi dị elu na 3D Nkwalite.bọọdụ sekit ebipụtara nwere mpaghara siri ike yana mpaghara na-agbanwe agbanwe nwere ọnụ ọgụgụ dị ala belatara.Ngwakọta nke polyimide na FR4, ma ọ bụ FR4 na mkpa laminate.bọọdụ sekit ebi ebi na-agbanwe agbanwe nke na-ejikọ bọọdụ siri ike na-enweghị mkpa eriri ma ọ bụ njikọ, na-ebute mgbasa ozi ka mma.Site na onu ogugu SMD na njuputa.Ebe niile a na-ejikarị eme ihe dị.

Ikike -- Ọdịdị (Multlayer Flexable Paging or Bonding Structure/HDI Structure);Layer (2-20); Obosara Mpaghara Obere Mgbanwe (3mm);Ogologo Ahịrị / Oghere (N'ime: 3/3mil, Mpụ: 3.5/3.5mil);Opekempe olulu mmiri kacha nta (0.10mm(Mechanical Drilling),0.15mm(Laser Drilling));Obosara mgbanaka kacha nta (4mil);Oghere n'etiti oghere abd Conductor(Layer≤6:5mil, 7≤Layer≤11:6mil, Layer≥12:8mil);Ọkpụrụkpụ efere na oke oghere (1:1 (Ndị kpuru ìsì);16:1 (Site na Via));Akụkụ ziri ezi (± 0.1mm (kpọmkwem ± 0.05mm));Usoro nhazi elu (ENIG/ENEPIG/HASL/FLASH GOLD/HARD GOLD/OSP).

 

PCBs na-agbanwe agbanwe na Aluminom

Atụmatụ -- Aluminom ma ọ bụ ọla kọpa ikpo ọkụ.Dị na thermally conductive bonding ihe ma ọ bụ prepreg (0.3-3.0 W/(m•K)).Ọ dị na ụdị ọkpọ ọkpọ, ma ọ bụ chụpụrụ ya.

Ikike -- Akụrụngwa (Polyimide);oyi akwa (otu akụkụ - 3 Layer);Ọkpụrụkpụ nke Ngwaahịa Emechara (50µm - 1200µm (gụnyere Stiffner));Ọkpụkpụ ọla kọpa (9µm / 12µm / 18µm / 35µm);Min.Ahịrị / oghere (65µm / 65µm (LDI));Elu (OSP/ Immersion Tin / Immersion Ni / Au / Plated Ni/Au);Ogwu kacha nta (0.2mm).

FPC
TP
FPCpic1

Ngwa:

* Medical - ngwaike nyocha, ngwa eletrọnịkị ahụike na ngwaọrụ onyonyo ahụike.
* Nzikọrịta ozi PCBTelekomunikashions - Ndị na-ebu mgbawa dị elu na ngwaahịa nkwukọrịta fiber-optic.
* PCBI ụlọ ọrụ na azụmaahịa azụmaahịa - Robotics, ngwa eletrọnịkị na ngwa ọkụ ọkụ LED.
* Ụgbọ ala na akpaaka PCBA automotive - modul igwefoto, ọkụ na ngwa elektrọnik ndị ọzọ.

ngwapic1
ngwapic3
ngwapic5
ngwapic7
ngwapic2
ngwapic4
ngwapic6
ngwapic8